3.5" to 3" ID Gloss Black - long leg on 3.5"

3.5" to 3" ID Gloss Black - long leg on 3.5"This 90 degree silicone elbow is 3 1 2" ID with an 8" leg on one end, and 3" ID with a 6" leg on the other end. It can be used any place you need a reducing 90 degree bend with a longer leg. This hose handles 350F continuous and is perfect for intercooler aftercooler and turbocharger applications. Five ply reinforced silicone for high strength. We now recommend all silicone elbows be 5 ply or better. Thick 7 32" wall construction. Full 6" leg lengths.

-3) up to AN20 (-20)

94 BAR Burst Pressure 5000 PSI

This 90 degree silicone elbow is 3" ID on one end and 2-3/4" ID on the other and can be used anyplace you need a reducing 90-degree bend

This 2-1/2 inch to 2 inch reducing silicone coupler is 3 inches long

5" ID charge air cooler hose with rings and is ideal for aftercooler systems

9 BAR Burst Pressure 6000 PSI

2mm) wide stainless steel fastener & screw/housing assemblies

Recommended clamps are 94100-0350 on the small end and 94100-0438 on the big end

This 1-3/4 inch to 1-1/2 inch reducing silicone coupler is 3 inches long

Recommended clamps are 94100-0288

12" ID leg is 4-3/4" long and the 3" ID leg is 5-1/4" long

This 8-inch ID 45-degree intake hose can be used anywhere you need to join two 8" OD tubes with a 45 degree bend