3.5" OD X 12" Long

3.5" OD X 12" LongStandard aluminum intake tubing. 6063T52 alloy . 065 wall thickness. Cuts easily with a hack saw. About 1 1 2 inches on each end goes inside an intake hose (minimum 1 inch). Mill finish (as it arrives at our location from the mill after traveling on a truck and being handled several times) may have minor defects and small scratches, but no dents or major defects. Made in USA.

This 3-1/2" to 3-1/2" charge air cooler hose has reinforcing stainless steel rings to help the hose keep its shape and handle more pressure under high temperature conditions

Recommended clamps are 94100-0412

Wall thickness

You install it in the end of the 2-1/2" rubber elbow or hump hose

but no dents or major defects

This 5-1/2" hump hose is used to connect two 5-1/2" OD intake tubes

Recommended clamps are CT300

This 2-1/4" 45-degree intake hose can be used anywhere you need to join two 2

This reducing insert adapts a 2-1/4" ID intake hose to a 2" OD tube

This reducing 90-degree intake elbow can be used any place where you are connecting a 6" OD tube and a 5-1/2" OD tube

This reducing insert adapts a 4" ID intake hose to a 3-1/4" OD tube (or throttle body)

Rated at 500 F continuous